Disclaimer: Woodworking can be dangerous. You follow these instructions at your own risk. I can not take responsibility for any problems or injuries. This is a rough guide, not a complete step by step. If you decide to attempt this project, make sure you plan adequately and do not assume this guide is complete.
Boos Blocks Kitchen Counter - Island Top Installation
Intro | Island Top Installation | Counter Top Base Construction | Counter Top Installation | Finishing Touches
| |
|
click for a larger image |
| Here is a picture of my new 2.5" thick island top placed on top of my existing island top. |
|
 |
|
Replacing an island top is pretty simple. Just open up the cabinets underneath and remove everything, including the drawers.
After everything is out, locate the screws holding down the original top. |
|
 |
|
| Since my island is on the smaller side, there are only 6 screws holding it down at the corners. |
|
 |
|
| Once the screws are removed, simply remove the old top. |
|
 |
|
Replace the new top and center it. Then drill pilot holes for the screws and then screw the new top in place.
That's it!
The new counter top, however, is significantly more work because I have to build the counter for it to go on top of! |
|
 |
|
Intro | Island Top Installation | Counter Top Base Construction | Counter Top Installation | Finishing Touches
|
|
|
Contact |
Register | Login
